5 Factors Impacting Your HVAC System’s Efficiency in Daphne, AL

Is your HVAC system losing its efficiency? An inefficient HVAC system can raise your utility bills and diminish your comfort. Here are the five factors impacting the performance of your HVAC system in Daphne, AL:

Precise Sizing and Quality of Installation

Firstly, sizing is critical for the efficiency and lifespan of your HVAC system. Improper sizing often leads to high running costs and deteriorating indoor air quality.

An HVAC system with a capacity exceeding the home’s cooling demand tends to operate in short cycles. Intermittent cycling suggests your equipment won’t effectively dispel moisture from the house.

As relative humidity exceeds 75% in April, you may not get optimum comfort from your cooling system. A cycling HVAC system switches on and off too quickly. Your HVAC system will turn off before completely draining the moisture passing through the coils.

If the system’s capacity is too small, it’ll run continuously. As a result, it’ll raise your utility bills. Your HVAC system installation must comply with industry standards and building code regulations.

Airflow Distribution Across the Building

Airflow distribution in your home is another factor that can influence the performance of your HVAC system. The installation of intake vents and air ducts requires precise engineering to optimize comfort and indoor air quality.

You can prevent airflow blockages by changing or replacing your filter once a month. Airflow blockages may damage the HVAC system’s motor. What’s more, they can shorten the equipment’s lifespan.

Make a point of checking vents and registers for blockages. A piece of furniture in the room could be obstructing airflow. As a result, it’ll force your HVAC system to run continuously.

Shutting off some vents won’t reduce your home’s energy consumption. Your HVAC system’s venting and ductwork design must factor in the cooling demands of the home. Closing vents will create air pressure imbalances that could cause the ductwork to crack.

Leaky ductwork is one of the leading factors influencing energy consumption and HVAC performance. You may lose up to 40% of the conditioned air through cracks in the air ducts.

Ideally, you should schedule an inspection to analyze the home’s envelope and check for ductwork leaks. Our highly skilled AC repair service technicians will recommend lasting solutions for your home’s energy efficiency and comfort.

SEER Ratings and Energy Efficiency Features

SEER (Seasonal Energy Efficiency Ratio) is a standard unit for measuring your cooling system’s energy efficiency. A system with a high SEER rating can deliver more cooling output but consumes less energy than similar models.

The U.S. Department of Energy defines the minimum standard for cooling systems in various regions. The minimum SEER is 14 in the southeastern United States, where the climate is hot and humid through the spring and summer seasons.

Investing in an air conditioning system with a higher SEER rating can reduce your energy consumption. A high-efficiency AC utilizes advanced features like variable-speed motors. As a result, they minimize the strain on your HVAC system.

A traditional model with a single-speed motor cannot adjust to different temperature and humidity requirements. A variable-speed system can run at 25% of its capacity while keeping your home comfortable throughout the season.

Thermostat Function and Temperature Settings

The role of the thermostat is to monitor and regulate the home’s climate control process. It signals your HVAC system to start when the temperatures rise beyond a specified limit.

If the thermostat is faulty, it’ll inevitably influence the performance of your HVAC system. A defective device could cause short cycling and compressor failure.

Make a point of replacing the batteries and testing the thermostat at least once a year in spring. An HVAC professional can calibrate the device to ensure optimum performance. As a result, they can protect your HVAC equipment.

Age of the Unit and HVAC System’s Maintenance

Finally, an HVAC system may lose its performance after years of operation. You can expect your equipment to last between 10 and 15 years.

However, your HVAC system’s lifespan will depend on the maintenance frequency. If you skip the annual service, your system will become increasingly susceptible to faults. As a result, it’ll wear out faster and break down more often.

Choosing an appropriate HVAC system is crucial for your home’s comfort and energy efficiency. Our team offers emergency replacements without after-hours charges. Contact Strada Electric, Security & Air Conditioning for fair pricing and timely AC installation services in Daphne.

Image provided by iStock

You May Also Like

Commercial HVAC
December 18, 2022

5 Commercial HVAC Considerations to Boost Your Business in Tampa, FL

A commercial HVAC system helps to improve air quality and create a conducive environment for your customers and workers. Regulating its energy…

Read More…

Heating Maintenance
December 8, 2022

Add Heating Maintenance to Your Holiday To-Do List in Ocala, FL

You’ll need a warm and comfortable home to entertain friends and family this holiday season. Ensure your furnace is up for the…

Read More…

Air Filters
November 22, 2022

Are Air Filters Important for HVAC Systems and Health?

The air filter in your HVAC system plays a vital roll in keep your house comfortable. It also helps to keep you…

Read More…